Datron Dynamics High Speed Machining
Datron Logo
M10 Precision Aerospace Machining Center for precision machining of aluminum and plastic aerospace parts

Precision Machining of Aerospace Parts? DATRON is a logical choice. High Speed CNC Machining Precision for Aluminum and Plastic Aerospace Part Milling.
Download Precision Machining Aerospace Parts Brochure See Precision Machining Aerospace Part Video Call the Precision Aerospace Parts Experts!
Subscribe to a newsletter covering precision machining of aerospace parts and other applications Precision Aerospace Machining Centers
Email the Precision Aerospace Parts Machining Specialists!
Precision machining of aerospace parts like this LED Aviation Instrument machined from cast acrylic plastic
Precision Machining of Aerospace Parts begins with DATRON. That's because DATRON high speed CNC machining centers are designed spcifically for the efficient machining of aluminum, plastics and composite materials often used in aerospace part production. 40,000 - 60,000 RPM spindles combined with large machining areas up to 1,020 mm x 2,500 mm facilitate precision machining of aerospace parts from sheet material. Other features like probing and automatic tool change enable unattended or lights-out production and help to ensure accuracy and quality when performing precision machining of aerospace parts. Vacuum tables and pneumatic clamping help to minimize set up time. Finally, 5-Axis capability allows for precision multi-sided machining of complex aerospace parts.
This aviation support frame shows precision machining of aerospace parts performed on DATRON high speed CNC machining centers
Aviation LED Instruments like this one used in the cockpit of fighter jets require precision aerospace machining ... and DATRON is the clear choice.
Cast Acrylic plastic ... a military grade can be machined with precision of DATRON high speed CNC machining centers
Precision Machining Aerospace Part Video
Precision Machining Aerospace Part Video loading (approx. 60 sec.).
ABOVE: Precision machining of an aerospace LED instrument from start to finish. Used in the cockpit of fighter jets.
Aerospace Precision Machining with DATRON CNC.

Precision machining iof arospace parts is performed quickly with DATRON high speed milling machines. High speed CNC spindles are ideal for Milling Aluminum Control Panels and our ethanol coolant simply evaporates after machining leaving clean aerospace parts and eliminating secondary operations like degreasing. Aerospace Machining Precision!

Benefits for Front Panel Machining:
• Up to 60,000 RPM Spindle
• Ethanol Coolant Evaporates!
• Integrated Clamping & Workholding
• Automatic Tool Changer
• Large work area up to 100" x 40"
• Microsoft Windows-based Control
Cockpit control panels are often machined from plastics painted and engraved with precision aerospace part machining centers by DATRON.
Aluminum is lightweight and therefore is and ideal material for precision machining of aerospace parts.
Precision machining of aluminum aerospace parts like this are produced with high speed CNC machining centers featuring vacuum table workholding to fixture sheet material quickly and accurately.
Probing capability of DATRON high speed CNC machining centers provides accuracy and repeatability for precision aerospace part machining.
Vacuum table workholding on DATRON high speed CNC machining centers allow for quick set up of sheetmaterial and precision machining of flat arospace parts
Aluminum housings and enclosures are often required in aerospace design and DATRON high speed CNC machining centers deliver efficiency and precision in machining aluminum aerospace parts.
Smal aluminum aerospace parts can be batch machined on DATRON high speed CNC machining centers due to the large work area that accommodates sheet material
Precision aerospace machining using small tools: In aerospace part manufacturing for today’s high-tech environment, micro machining is a necessity. And, in order to achieve efficiency with small tools, you need a machining center designed for them... exclusively. Our ultra-high-speed spindles exhibit very low force ... which translates to high feed rates with maximized tool life and superb, burr-free surface and edge finishes. Plus, this low force allows us to use vacuum power as an effective means of holding flat aerospace parts in place during machining. The ease-of-use of our workholding yields fast job set up and change over. Our Quick-Pallets technology and probing capability quickly registers new jobs so that machining aerospace parts can begin immediately. So, if one low batch of small aerospace parts is running and a couple of one-off, rapid prototyping jobs come in, you can switch in seconds. Best of all, when those rapid prototyping arts are done, just place the production batch of aerospace parts back on the machining table and pick up where you left off — the machine features powerful probing and control software that literally does the set up or re-registration for you. Datron CNC machining centers mill, drill, engrave, countersink and threadmill.
Precision machining of aerospace parts like this fighter jet ejection seat part can be produced with superior cycle times on DATRON high speed CNC machining centers
Vacuum table workholding for precision machining of flat aerospace parts
Acrylic and other plastics are often used in precision machining of aerospace parts like control panels and instument panels machined on DATRON high speed CNC machining centers

Vacumate – workholding for machining flat & thin aerospace parts.
The VacuMate™ from Datron is designed to swiftly and efficiently secure flat workpieces to the bed of a machining system. Thin stock, which could be secured only with great difficulties before, is now secured literally within seconds. Quickly secure plastic foils as thin as 0.001”, to 0.250” large aluminum sheets. Here’s how it works:

A vacuum pump provides vacuum power for the system to work. A vacuum table features airflow-optimized vacuum ports, with recessed vacuum chambers, to provide superior vacuum distribution. A low cost gas-permeable substrate serves as a sacrificial vacuum diffuser, allowing the cutter to machine through the workpiece, without cutting into the table. 
Pneumatic clamping for quick setup and machining of aerospace parts.
Complex aerospace parts often require precision 5 axis machining capabilities such as this trunnion style 5 axis DATRON high speed CNC machining center
3D probing for precision machining of rounded or contoured aerospace parts
Questions on Precision Machining of Aerospace Parts?

Call 888.262.2833
Datron Dynamics, Inc.
115 Emerson Road
Milford, NH 03055
German Engineered. American Supported. High-Speed CNC Milling and Engraving Machines for Precision Machining.
phone: 603.672.8890
info@datrondynamics.com
In our constant effort to improve our products and services,
we reserve the right to change specifications with or without notice.
(c) Datron Dynamics, Inc. 2005
Terms And Conditions Of Sale apply.
DATRON High Speed CNC Machining Center is the ideal choice for Precision Aerospace Machining Applications. Machining aerospace parts out of aluminum benefits from a 40,000 to 60,000 RPM spindle , Automatic Tool Change and Vacuum Workholding - for quick set up and shorter cycles.