Today's solar industry increasing requires a combination of quality and cost containment that can only be achieved through the use of intelligent manufacturing technology. DATRON machining centers are ideally suited to solar milling operations while our dispensing systems were specially developed for industrial adhesive or sealing applications. These have earned customer confidence for high performance and volume consistency.
 |
||||||||
 |
 |
 |
 |
 |
 |
|||
 |
||||||||
DATRON milling & dispensing systems for the solar industry - solar cells, solar panels, solar modules, solar cell frames, backrails & carrier rails.
Complete, turn-key CNC solutions designed for automated and reliable series production of solar modules.
Above: Yellow line represents material dispensed by DATRON CNC Machine to seal the PV Cell.
Bonding and Sealing in the Production of Photovoltaics:
• Frame gluing
• Edge sealing
• Butyl hotmelt dispensing
• Backrail/connection box bonding
• Bonding/stringing busbars
• Frame gluing
• Edge sealing
• Butyl hotmelt dispensing
• Backrail/connection box bonding
• Bonding/stringing busbars
Applications / Benefits:
• Dispensing of liquid adhesives or sealants on frame profiles or modules
• Short cycle times for continual production flow
• Sharp-edged, rectangular sealing shapes
• Dispensing on the provided position of the solar module
• Dispensing on the assembly profile or the connection box
Materials:
• Dispensing hotmelts (reactive up to 210°C)
• Butyl up to 210°C
• Silicone 1K and 2K
• Electrically conductive adhesives
Bead Shapes:
• Shaped beads
• Round
• Rectangular
• Combination of different materials
Solar Cell (PV) Machining:
• Milling frames
• Machining backrails
• Milling carrier rails
• Milling slots & grooves
• Milling thin flat PV material
• Machining Profiles and Extrusions
• Microdrilling & Threadmilling
DATRON dispensing systems for the solar industry
To quickly and reliably apply bondings or seals requires systems that, based on your specifications, can be integrated into your manufacturing with simplicity and flexibility. Through the combination of our electronic dispensing head and the patented control engineering, a high degree of process reliability and flexibility is attained. The use of special software technologies makes speed-independent dispensing possible, thereby ensuring high dispensing speeds with short cycle times regardless of the material being used. These systems work independently of pressure and viscosity, so that process parameters do not need to be adjusted due to altered manufacturing conditions. In connection with the accessories developed for dispensing tasks, DATRON offers system
solutions from one source to guarantee optimum quality for your manufacturing.
To quickly and reliably apply bondings or seals requires systems that, based on your specifications, can be integrated into your manufacturing with simplicity and flexibility. Through the combination of our electronic dispensing head and the patented control engineering, a high degree of process reliability and flexibility is attained. The use of special software technologies makes speed-independent dispensing possible, thereby ensuring high dispensing speeds with short cycle times regardless of the material being used. These systems work independently of pressure and viscosity, so that process parameters do not need to be adjusted due to altered manufacturing conditions. In connection with the accessories developed for dispensing tasks, DATRON offers system
solutions from one source to guarantee optimum quality for your manufacturing.
DATRON milling systems for the solar industry
For the milling of solar parts like frames, backrails and carrier rails,DATRON is the clear choice. That's because these are often made of aluminum extrusions or profiles and our high-speed machining technology is ideal for milling, drilling and even engraving of this material. Our large-format machines, in particular accommodate long extrusions and profiles. All of our models can be equipped with pneumatic clamping systems for holding extrusions or vaccum table workholding for sheet material. Rotary axes are available for multi-sided machining of profiles, frames and other solar parts. Each DATRON machining center is custom-built based on the customer's unique application — resulting in turn-key solutions to your production requirements.
For the milling of solar parts like frames, backrails and carrier rails,DATRON is the clear choice. That's because these are often made of aluminum extrusions or profiles and our high-speed machining technology is ideal for milling, drilling and even engraving of this material. Our large-format machines, in particular accommodate long extrusions and profiles. All of our models can be equipped with pneumatic clamping systems for holding extrusions or vaccum table workholding for sheet material. Rotary axes are available for multi-sided machining of profiles, frames and other solar parts. Each DATRON machining center is custom-built based on the customer's unique application — resulting in turn-key solutions to your production requirements.
• PV Cell Manufacturing
• Solar Panel Production
• Solar Mudule Manufacturing
• Solar Cell Frame Gluing
• Solar Cell Frame Milling
• Backrail Milling & Bonding
• Carrier rail Milling & Bonding
• Photovoltaic Bonding & Sealing
• Carrier rail Milling & Bonding
Call 888.262.2833
|
Datron Dynamics, Inc.
115 Emerson Road Milford, NH 03055 |
German Engineered. American Supported. High-Speed CNC Milling and Engraving Machines for Precision Machining.
|
||||||
|
phone: 603.672.8890
info@datrondynamics.com |
In our constant effort to improve our products and services,
we reserve the right to change specifications with or without notice. |
||||||
|
(c) Datron Dynamics, Inc. 2005
|
|||||||