

		[products] [why datron] [applications] [samples] [micro-tooling] [news] [contact]

Graphite Electrode for Cell Phone Mold made on Datron Micro Mold CNC Machine

Micro Molds & Micro Milling CNC Home Page: Use Advanced CNC Technology to Make Micro Components & Electrodes and Remain Competitive.

CELL PHONE ELECTRODE
Made on Datron High Speed CNC Micro Milling Maching for Micro Mold Making.

Micro Mold Making Capabilities:
• Tight Tolerances
• 4th & 5th Axis Options
• Difficult to Machine or Hard Materials
• Difficult Geometry and/or 3D Shapes
• Burr Free Manufacturing
• Low Stress on Materials
• Integrated Workholding

Applications for Micro Molds:
• Medical Devices: Catheters, Cannulas, Needle Sheaths, Surgical Instruments, Bio-resorbable Implants

• Electrical/Electronics (Insert Molding, Reel-to-Reel Applications): Inserted Connectors, Miniature Electronic Devices, Fiber Optics, Micro Sensors, RFID Chips

• Microfluidics: Blood Analyzers, Micro Plates, Lab-On-A-Chip, Micro Channels, Lancets

• Industrial: Micro Pumping Mechanisms, Spray Nozzles, Atomizers

If you’ve landed on this Micro Mold & Micro Milling Home Page, you’re probably looking for ways to remain competitive in a new global economy that tends to rely on countries with low labor costs. Well, we’re happy to tell you that we have a solution for you. Since other countries produce things cheaper, we have to produce micro components that they simply cannot make. As everything in our physical world is getting smaller, we have a new opportunity to gain a competitive advantage.

Datron high speed micro milling CNC equipment will give you capabilities that you never dreamed of. Whether you’re making micro molds to produce micro components for aerospace, electronics, medical automotive or telecommunications, you need to use small micro tools and a means of running them with efficiency. Frequently, making these tiny molds requires EDM micro electrodes that present challenges to the process of micro milling. Not the least of which is the fact that polishing and handwork is not practical where these intricate parts are concerned – so a quality surface finish must come from the machining process itself.

The extreme demands of milling both active mold areas and EDM micro electrodes on a miniature scale is a challenge that Datron is up to. That’s because our micro milling CNC equipment is designed exclusively for achieving efficiency with small tools with diameters down to 100 microns. As such, they feature high speed, 60,000 RPM spindles that evacuate chips, minimize runout and produce the highest quality micro components and electrodes.

With the micro mold maker in mind, Datron machines also have an optional Positive Air-Flow Dust Collection System. For medical applications, this system complies with HEPA requirements. Each filter is tested according to U.S. Military Standard 282 (MIL-STD-282) and IES (Institute of Environmental Sciences) standard Type A HEPA filter. The HEPA filter is rated with a minimum efficiency of 99.97% @ 0.3 microns and tested using the HOT DOP method @ 100 CFM. Each HEPA filter is certified and labeled with specific test results.

Dust collection system for milling micro EDM electrodes

High speed spindle protected and optimized for both micro tooling and milling micro graphite electrodes

Aside from dust collection, Datron takes further measures to protect your investment. The linear guide ways and precision ground ball screws are covered and feature positive airflow as well as an automatic greasing system that forces any debris out of the machines’ working parts. The spindle is pressurized to prevent any dust from entering the bearings. The enclosure is designed for optimized airflow and can easily be fitted with a dust collector or your existing dust collection system to keep airborne dust in check. Plus, our products’ compact design, together with the 208V-7 Amps power requirement, allows it to be placed right next to your ram EDM machine.

DATRON MACHINES RECCOMMENDED FOR MICRO MOLDS & ELECTRODES:

M7
Applications Requiring:
• Medium Tolerance
• Good Surface Finish

M10
Applications Requiring:
• High Tolerance
• Glass Surface Finish
• Graphite or Abrasive Materials (EDM Electrodes)


	Datron Dynamics, Inc. 115 Emerson Road Milford, NH 03055			Wielding the power of Datron high-speed machines may be hazardous to your competition.
	phone: 603.672.8890 info@datrondynamics.com			In our constant effort to improve our products and services, we reserve the right to change specifications with or without notice.
	(c) Datron Dynamics, Inc. 2005			Terms And Conditions Of Sale apply.